L298 BOARD RED
Product features:
- This module USES L298N as the main drive chip, with strong driving ability, low heat, and strong anti-interference ability.
- Through this module can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage greater than 12 v, please use the external power supply 5 v logic.
- This module USES a large capacity filter capacitance, and a continuation protection diode, which can improve reliability.
The L298N motor driver is an integrated circuit (IC) that is commonly used to control the speed and direction of motors in robotics and other electronic projects. It is a dual H-bridge motor driver, meaning it can control the speed and direction of two DC motors or one stepper motor.
The L298N is a module that can be controlled by a microcontroller, such as an Arduino or Raspberry Pi. It can be used to interface with a wide range of motors and can supply up to 2A of current per channel. It allows for control of the speed and direction of the motors via PWM and direction control input pins.
The L298N has two input pins for each motor, IN1 and IN2, that are used to control the direction of the motor. It also has a PWM input pin, EN, that is used to control the speed of the motor.
It also has built-in protection features such as thermal shutdown, over-current and short-circuit protection, which helps protect both the IC and the motor.
| Drive voltage |
5V-35V |
|---|---|
| Logical current |
0mA-36mA |
| Storage temperature |
– 20 ℃ to + 135 ℃ |
| Maximum power |
25W |
Reviews
Clear filtersThere are no reviews yet.