DC5-12V PWM Power controller Remote Control Relay Module Remote Switch lamp PWM With LED Display
How to use:
1. Connect:
Plug the signal cable into an idle receiver channel that corresponds to a switch on the remote.
The power indicator will be lighted when connected to the receiver.
The work indicator lights up when the switch channel is open and vice versa.
2. Working mode:
The red LED light is a power indicator.
Another red LED indicates the relay’s operating status.
Only 5V-12V voltage receiver is supported, otherwise the module may be damaged. If the receiver and the servo are using a high voltage system, the module should be added with a buck module.
One channel servo signal input, control one way electronic switch
One way LED indicates working status
With boot protection, easy to operate
Input channels do not need to be calibrated, compatible with all brands of remote control devices
Application:
– Remote control model rocket launch
– Remote control model smoke control
– Weapon system control like real machine
– Smoke control of the model aircraft
– Control of various remote switching systems
– Switch the signals of the two cameras
– Control the opening and closing of various electrical power sources, such as navigation lights, searchlights, strobe lights, buzzers,water pump
| Maximum Current |
20A |
|---|---|
| Operating Voltage |
5V-12V |
| SIZE |
41mm*16mm*14mm |
| NET WEIGHT |
13GM |
Reviews
Clear filtersThere are no reviews yet.