1.8V – 12V/2A DC Motor PWM Speed Regulator
The DC Motor PWM Speed Regulator 1.8V, 3V, 5V, 6V, 12V-2A speed control switch function for DC Motors allows controlling the direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 0%-100%.The motor speed controller can easily provide a continuous current of 2A to your DC motor or other DC load.
1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator
This 1203B PWM 6V 12V 24V 28V 3A DC Motor Speed Regulator allows controlling the speed of a motor with fully adjustable 0%-100%. The motor speed controller can easily provide a continuous current of 3A to your DC motor or other DC load.
12V-40V10A DC Motor PWM Speed Control Switch Governor
The DC Motor Speed Controller allows controlling direction of a DC motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully adjustable from 10%-100%. The motor speed controller can provide a continuous current of 8A to your DC motor or other DC load. The circuit also includes a 10A fuse, with the reverse connection of power supply and control voltage over-voltage protection function.
16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi
You can control 16 free-running PWM outputs with 16-Channel 12-Bit PWM/Servo Driver using only 2 pins. You can even chain up 62 breakouts to control up to 992 PWM outputs.
20A PWM DC Motor Speed Regulator 9V 12V 24V 36V 48V 60V
The 20A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V) is suitable for the DC brushed motor (or DC load) within 20A. It comes with the metal shell and connective label, which makes it very easy to install and use.
24VDC Mini Solenoid Valve For Water Air Gas
24V DC Mini Solenoid Valve for Water Air Gas . This multi-purpose Solenoid valve operates on 12 V DC power. Normally when power is off it cut the flow and applying 24 v power opens the valves.
30A MOTOR DRIVER – VNH5019
The motor indicates an LED that indicates the output status when there is no motor connection.
Protection function: Maximum input voltage 41V without damage / over/under voltage protection / thermal shutdown of upper and lower bridge.
DC MOTOR 3V 6V 12V 24V 35V SPEEDCONTROL SWITCH FUNCTION 5A
DM556 Digital Stepper Motor Driver for CNC Drivers Controller
The advantage of using the DM556 Stepper Motor Driver is to control the speed and position of the stepper motor. These kinds of drivers can be used for a small range of stepper motors. Using these kinds of drivers one can minimize the code and connections. In this driver, a new feature has been added where we can set the current Mode.SW4 is used for this purpose. OFF meaning that the standstill current is set to be half of the selected dynamic current, and ON meaning that the standstill current is set to be the same as the selected dynamic
current.
DM556 STEPPER MOTOR DRIVER
The DM556 is a versatility fully digital stepping drive based on a DSP with an advanced control algorithm. The DM556 is the next generation of digital stepping motor controls. It brings a unique level of system smoothness, providing optimum torque, and nulls mid-range instability. Motor self-test and parameter auto-setup technology offer optimum responses with different motors and easy-to-use.
Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module
The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half bridge. the BTS7960 is part of the NovalithICTM family. This containing one p-channel high side MOSFET and one n-channel low side MOSFET; with an integrated driver IC in one package. Due to the p-channel high side switch; the need for a charge pump is eliminated thus minimizing EMI.
DRV8825 Stepper Motor Driver with Aluminum Heat Sink
The DRV8825 Stepper Motor Driver with Aluminum Heat Sink is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.
The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.