Hall Sensor Only A44E
“Hall effect Sensor 44E is a switched hall-effect IC which is for contact less switching applications.The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier that amplifies the Hall voltage, a schmitt trigger to provide switching hysteresis for noise rejection, and an Digital Output Hall-effect sensor.Suitable for Automotive and Industrial Applications. 3V To 30V hall Effect Switch/Magnetic Sensor Working Voltage.”
Hall Effect Sensor Magnet Detector Switch for Arduino is a switch that will turn on/off in the presence of a magnetic field. If no magnetic field is present, the signal line of the sensor is HIGH (3.5 V). If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time the LED on the sensor lights up. An onboard LED will also indicate the presence of a magnetic field.
Pin Connection
Connect the Powerline (middle) to +5V and ground (-) to GND. Connect signal (s) to any digital pin on the Arduino.
| Operating voltage |
3V to 30V |
|---|---|
| output current |
25mA |
Reviews
Clear filtersThere are no reviews yet.