TRENDING PRODUCTS
420PCS DIY Blocks Education set – Mechanical Assembly
WARNING:
Not recommended for children under 3 years of age because of small parts.
Please note that because of the way some parts and instructions are packaged in sets, some minor wearing and / or scratching (especially on larger parts) is inevitable.
Product Included:
1*420 PCS bricks sets (Paper Box)
If you have any questions about product, please feel free to contact me.
We accept bulk order, dropshipping and customized product
4WD Mecannum wheels Normal Chassis Kit
4WD Mecanum Wheel Robot Kit series products are 4 wheel drive mobile platforms based on Mecanum wheels. Each kit contains two left mecanum wheels as well as two right mecanum wheels. The four Mecanum wheels are each connected to a separate motor with independent control. Depending on each individual wheel direction and speed, the mobile platform can move forward, backward, sideways and any other desired directions or spin.
DJI NAZA M V2 Multirotor Autopilot Controller set with GPS
DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS Supports nine multi-rotor configurations, the DJI NAZA-M V2 Multirotor Autopilot Controller set With GPS acts as the brains of the aircraft, managing pilot input and interpreting data from the various sensors, helping maintain a stable flying condition. There are four components to the system.
The MC (main controller) houses the flight computer and is at the heart of the flight control system. Then there is the PMU (power management unit), which serves to regulate how much power is sent to each of the four, six, or eight rotors. Finally, a GPUs receiver/compass combo is included, which enables a number of features, including Intelligent Orientation Control (IOC) and the Go Home failsafe.
DJI NAZA-M Lite V1.1 with GPS Kit
The DJI NAZA-M Lite V1.1 with GPS Kit is a simplified version of, and it inherits the high reliability and stability from the Naza M flight controller’s heritage. The Naza M Lite controller has an all-in-one design that means the installation is easy and straightforward while saving space and weight. In this small flight controller, you will find there is inner damping, 3-axis gyroscope, 3-axis accelerometer and a barometer. The Naza M Lite measures flying altitude and attitude which is used for autopilot / automatic control for altitude hold, the GPS provides a position hold capability enjoyed on the Naza M V2 and DJI Wookong M flight controllers. The Naza M Lite GPS is the most cost-effective solution to offer so much from the DJI Innovations line of flight controllers.
Drone Nozzle 110 Degree 20mm Double
Working Pressure:: 2-6 bar
Wheelbase: Screws
Use: Vehicles & Remote Control Toys
Upgrade Parts/Accessories: agricultural spray nozzle
Tool Supplies: agricultural spray nozzle
Technical parameters: Value 2
Spray Angle:: Flat Fan
Size: 8MM
Remote Control Peripherals/Devices: agricultural spray nozzle
Recommend Age: 14+y
RC Parts & Accs: agricultural spray nozzle
Quantity: 1 pcs
Origin: Mainland China
Nozzle Model:: 11001,11002,11003,11004,11005,11006,11008,110010
Model Number: 8MM
Model Number: agricultural spray nozzle
Maximum pressure resistance:: 20KG(2MPA)
Material: Plastic
Intubation Diameter:: 8MM
Four-wheel Drive Attributes: agricultural spray nozzle
For Vehicle Type: Airplanes
Flowing mode:: Inside water drip prevention
Feature:: Drip-proof
Boom outer diameter:: 20MM
Application areas:: agriculture, forestry
ESP32-A3 development board with 1.28inch round touch lcd
Features:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
- 264KB of SRAM, and 4MB of onboard Flash memory
- Type-C connector, keeps it up to date, easier to use
- Onboard 1.28inch capacitive touch display, 240×240 resolution, 65K color
EsunPLA+ filament,1.75mm 1kg Black
Main Features of PLA+:
eSUN High-Quality Filament:
For best 3D printing filament quality always matters, but you don’t have to pay through the nose for a string of plastic! eSUN Industrial is an international leader in FDM innovative technologies and their filament is a testament to their dedication to quality and cost-effectiveness. Most PLA colors are glossy and marginally translucent.
eSUN PLA+ Compatibility:
PLA has a lower melting point, less shrinkage and is non-toxic; making it an ideal material for everyday 3d printing which is compatible with almost all printers in the market.
Diameter Consistency:
It’s important that your filament has a very constant diameter if you want to get a great looking print. Variance in filament diameter will result in poor surface quality (primarily on vertical sections) because it produces unwarranted and uncontrollable fluctuations in extrusion rates.
eSUN promises that their filament has a tolerance of ±0.05mm across all of their rolls that they produce, but in reality, the quality of eSUN’s filament far exceeds their listed specifications. You can be confident that your prints will have fantastic surface uniformity and smoothness with eSUN.
Colors:
A major part of what sparked the popularity in eSUN is the rich and vibrant colors of their filaments. One reviewer comments about eSUN’s colors “look nice and crisp and bright”. The product and gallery photo’s do show the colors looking great, but you won’t have your taste buds stimulated until you hold a beautifully printed part in your hands.
Not only are eSUN’s colors refined individually, but they also have one of the largest ranges available on the market.
FS-I6S+FS-IA10B
₹5,088.00 Incl. GST
Features:
- Bidirectional Communication :
- Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude, and many other types of sensors, servo calibration, and i-BUS Support.
- Multi-channel Hopping Frequency :
- The bandwidth of This system ranges from 2.4055GHz to 2.475GHz. This band is divided into 140 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean versions) in order to reduce interference from other transmitters.
- Omni-directional Gain Antenna :
- The high efficiency Omni-directional high gain antenna cuts down on interference while using less power and maintaining a strong reliable connection.
- Unique ID Recognition System :
- Each transmitter and receiver has its own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems from accidentally connecting to or interfering with the system’s operation.
- Low Power Consumption :
- The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one-tenth the power of a standard FM system, dramatically extending battery life.
Hobbywing Pump 5L Kit with Nozzle
Features:
- Versatile Spraying: Suitable for various applications like gardening, pesticide spraying, and surface cleaning.
- Pressure Nozzles: Ensures a consistent and controlled spray pattern for precise application of liquids.
- Powerful Water Pump: The 5L brushless water pump provides a continuous and powerful flow of water.
- User-Friendly Interface: Easy-to-use controls and adjustable settings for customized spraying.
- Quiet Operation: The brushless water pump operates quietly, reducing noise disturbance.
- Durable Construction: Built to withstand demanding conditions and ensure long-lasting performance.
- High-Quality Components: Reliable components ensure efficient and effective spraying.
- Suitable for Large Areas: Offers efficient spraying coverage over sizable areas.
Package Includes:
1 x 5L Brushless Water Pump 4 x EFT Extension Rod High-Pressure Nozzles 1 x 4meter Tube 2 x 0.5 meter Tube(Different Diameter) 6 x Pneumatic tube connector 1 x Power Connector Accessories Set
NEW PRODUCTS
Jiyi K3 Apro Flight Controller Kit
K3APro is a new upgraded version of K3-A, the best-selling king of flight controller in the last three years. The reliability and stability of K3APro have been further improved and optimized on the basis of the original K3-A flight controller. From 2017 to 2018, K3A was used and recognized by 70% of domestic plant protection manufacturers, covering plant protection drone users in Asia, America, Europe, Oceania and other countries around the world.
ATTINY85 USB Development Board
ATtiny85 based microcontroller development board come with the USB interface. Coding is similar to Arduino, and it uses the familiar Arduino IDE for development. This is a digispark clone.
CP2102(6-pin) USB 2.0 to TTL UART serial converter
This is the CP2102(6-pin) USB 2.0 to TTL UART serial converter module. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port.
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver
CH341 is a USB bus convert chip, providing UART, printer port, parallel and synchronous serial with 2-wire or 4-wire through USB bus. In UART mode, CH341 provides alternant rate control signals such as serial transfer enable, serial receive in ready etc. It also supplies common MODEM communication signal in order to expand UART for
computer or upgrade common synchronous interface device to USB bus directly.
USB ASP AVR Programming Device for ATMEL Processors
The USB ASP AVR Programming Device for ATMEL processors is a USB in-circuit programmer for Atmel AVR controllers. This ATMEL Processors simply consists of an ATMega88 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver; no special USB controller is needed.
MAX485 TTL To RS485
This converter lets you send and receive data using the RS485 network from your Arduino/microcontroller. Similar to Serial TTL and RS232 interfaces, the RS485 lets you transfer data between microcontrollers and devices but with extra features! RS485 is an industry standard protocol for data transfer and provides numerous advantages.
Serial Port Mini RS232 to TTL Converter Adaptor Module Board
The RS232 to TTL 5V Signal Converter Module is a professional module for projects requiring PC/Laptop RS232 interface to 5V TTL logic. This module converts signals between RS232 voltage levels and TTL voltage levels. It is bi-directional, where TTL signals are converted to RS232 levels and RS232 levels are converted to TTL levels. It is ideal for use in pc interfacing, microcontroller based projects, robotics, or for experimental and educational purposes.
MCP2515 CAN Module
This is MCP2515 CAN Module TJA1050 Receiver SPI 51 Single Chip Program Routine Arduino with this module, you will find easy to control any CAN Bus device by SPI interface with your MCU, such as Arduino UNO and Compatible with Arduino based micro-controller projects.
SHOP BY CATEGORY
FEATURED BRANDS
Google Reviews
0
COUNTER LABEL
0
COUNTER LABEL
0
COUNTER LABEL
0
COUNTER LABEL